Publicidad
T2769
1
1
T4769
NOTE: The deck and valve rough-in must be finished before
installing the trim kit.
Model T2769
Unscrew the test cap (1) and discard.
Model T4769
Remove set screw (1). Remove and discard test cap (2).
1
2
Screw bases (1) with gaskets (2) over end valves (3). OPTION: Use
silicone under the gasket if deck is uneven. Install spout (4) on
adapter (5). Be sure spout is resting firmly on deck. Install set screw
(6) and tighten to secure spout (4). Model T2769 proceed to step 4.
Model T4769 proceed to step 3.
5
47797 Rev. A
Publicidad
