Publicidad
Idiomas disponibles
Idiomas disponibles
General information:
• 160 mm is the minimum bottom diameter
of the cookware for this function.
• Heat setting display for the left rear
control bar shows the position of the
cookware on the induction cooking area.
Front
, middle
• Heat setting display for the left front
control bar shows the heat setting. To
change the heat setting use left front
control bar.
• When you activate the function for the first
time you will get heat setting
front position,
and
for the rear position.
7. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones a
strong electro-magnetic field
creates the heat in the cookware
very quickly.
Use the induction cooking zones with
suitable cookware.
18
ENGLISH
, rear
.
for the
for the middle position
You can change the heat settings for each
position separately. The hob will
remember your heat settings next time
you activate the function.
Activating the function
To activate the function place the cookware
in the correct position on the cooking area.
Touch
. The indicator above the symbol
comes on. If you do not place the cookware
on the cooking area
minutes the flexible induction cooking area is
set to
.
Deactivating the function
To deactivate the function touch
heat setting to
. The indicator above the
symbol
goes off.
• The bottom of the cookware must be as
thick and flat as possible.
• Ensure pan bases are clean and dry
before placing on the hob surface.
• In order to avoid scratches, do not slide or
rub the pot across the ceramic glass.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
comes on and after 2
or set the
Publicidad
