Nylon strap
Wall
Metal bracket
Tools required (not provided): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8'' drill bit.
33. Ask for assistance to position the assembled unit at the desired location against a wall. If necessary, adjust
the installed floor levelers to level the door and correct the tilting.
34. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach
the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please
contact your local hardware store for assistance. Young children can be seriously injured by tipping
furniture. You must install the tipping restraint hardware with the unit to prevent the unit from tipping,
causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to
add the extra security of earthquake restraints, they must be purchased and installed separately.
35. The unit is now ready for use.
Assembly Instructions
Short screw
Long screw
Wooden stud
34
Wall
Floor leveler