Glacier bay HD67513W-6004 Guía De Instalación Y Cuidado página 7

Installation (continued)
7
Adjusting the length of lift rod strap (optional)
□
If the pop up lift rod strap (K) is interfering with your installation, as shown in Fig. 1, the lift rod strap (K)
can be cut shorter.
□
Once you have identified the proper hole in the lift rod strap (K) that is necessary for your installation, you
may cut off the bottom portion (1) of the lift rod strap (K) by snapping it off with pliers or cutting it off with
a saw at the cutting point (2), as shown in Fig. 2. Ensure the clip (L) does not slide off the lift rod strap (K).
Fig. 1
8
Checking the operation of the
pop-up
□
Operate the lift rod (M) up and down to verify
that the stopper (D) opens and closes correctly.
□ If you want to remove the flange (E), loosen the
lock nut (G) and push the rubber washer (F)
down into the top of the lock nut (G). Remove the
redundant silicone sealant. Top the drain body (H).
Hold the drain body (H) with one hand and loose
the flange (E) from the drain body (H) with the other.
As shown in the below fig 1.
2
G
K
K
E
F
F
G
H
3
Fig 1
K
L
E
7
Please contact 1-855-HD-GLACIER for further assistance.
1
2
Fig. 2
D
HOMEDEPOT.COM/GLACIERBAY
M