Publicidad
Idiomas disponibles
Idiomas disponibles
Recommended Speaker Layout
Soundbar
Subwoofer
135°
150°
Surround Speaker L
Manually connecting the Subwoofer or Surround Speakers
Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer or Surround Speakers are connected properly.
• Make sure that the Soundbar is turned off.
1. Turn off the Soundbar main.
2. Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds.
• The red indicator at the rear of each speaker turns off and the blue indicator blinks.
3. Press the Up button on the remote control for 5 seconds.
• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears.
• The Soundbar will automatically power on when ID SET is complete.
0°
135°
150°
Surround Speaker R
Rear of Subwoofer
x 2
POWER
Rear of the Left and Right Surround Speakers
5 Sec
CAUTION
• Wireless receiving antennas are built into the wireless subwoofer and
surround speakers. Keep the units away from water and moisture.
• For optimal listening performance, make sure that the areas around the
wireless subwoofer and surround speakers locations are clear of any
obstructions.
5 Sec
Rear of Subwoofer
5 Sec
ID SET
ENG - 14
Blinking
blue fast
Blinking blue fast
Publicidad
