Descargar Imprimir esta página

Bestron CRISPY & CO AOV45 Manual Del Usuario página 33

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
OPERATION - Using the roasting spit
You can use the roasting spit (13) to roast meat and poultry
to a nice, even brown colour.
1. Open the oven door.
2. Place the baking tray in the bottom groove in the
oven. The baking tray will collect any juice and fat
whilst roasting and prevent it from getting on the
bottom heating element.
3. Remove the clamp (14) from the round end of the
roasting spit.
4. Spike the meat or poultry to be roasted on the round
end of the roasting spit. Make sure the roasting spit is
inserted through the middle of the meat or poultry.
5. Use the clamps to secure the meat or poultry to the
roasting spit.
6. Place the roasting spit with the meat or poultry in the
oven.Insert the round end of the roasting spit into the
drive sleeve (10). Place the straight end of the
roasting
spit on the support.
7. Leave the oven door slightly open so as to allow the
air to circulate.
8. Use the temperature setting to set the required
Temperature.
9. Rotate the function setting to the setting
using the roasting spit we advise you to use only
the top heat, because the bottom heat elements are
covered by the baking tray which catches grease
and therefore it has no effect.
10. Use the timer setting to set the roasting time. The
amount of time required depends on the type and
quantity of food.The On/Off indicator will be lit.
11. Roast the meat or poultry until it is cooked. The oven will turn itself off automatically and a sound
signal will be heard once the roasting time has elapsed. The On/Off indicator light will go out.
12. Wear oven gloves.
13. Open the oven door. Take care! The door is hot.
14. Use the removal tool to remove the roasting spit with the meat or poultry and place it on a plate.
15. Close the oven door.
16. Remove the clamp from the round end of the roasting spit and remove the meat
or poultry from the roasting spit. Take care! The roasting spit and the meat or poultry are hot.
17. Use the removal tool to remove the baking tray from the oven. Take care! Any juice and fat on the
baking tray will be hot!
18. Once you have finished, rotate the function setting to
ATTENTION:
Make sure the meat or poultry does not touch the top heating element when turning.
If the meat or poultry is ready but the roasting time has not yet elapsed, you can turn off the oven by
rotating the function setting to
5
6
. When
and remove the plug from the plug socket.
. The timer will continue, but the oven will no longer be heated.
33
EN

Publicidad

loading