König KNLEDFL10W Manual De Usuario página 4

KNLEDFL10W / KNLEDFL20W
LED floodlight
Description (fig. A)
The LED floodlight is a broad-beamed, high-
intensity artificial light device equipped with a LED
lamp. The floodlight can produce bright light
without the use of expensive fixtures and
numerous bulbs. The floodlight can also provide
users with an easy and affordable way to deter
intruders and animals. The device is suitable for
both indoor and outdoor use.
1. LED lamp
2. Reflector
3. Glass plate
4. Front cover
5. Lock screw
6. Heat sink
7. Lamp bracket
Installation (fig. B)
The device can be mounted to the wall or to the
ceiling.
Warning!
• Before installation, switch off the device, remove
the mains plug from the wall socket and wait
until the device has cooled down.
• Refer to the illustration to install the device
correctly.
Wiring instructions
Number (step 4) Code
1
2
3
Description
N Neutral wire
Earth wire
L Live wire
4 4
Cleaning and maintenance
Warning!
• Before cleaning or maintenance, switch off the
device, remove the mains plug from the wall
socket and wait until the device has cooled
down.
• Do not use cleaning solvents or abrasives.
• Do not immerse the device in water or other
liquids.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
• Clean the outside of the device using a soft,
damp cloth. Thoroughly dry the outside of the
device with a clean, dry cloth.
Technical data
KNLEDFL10W
Input voltage 100 - 240 V AC
Frequency 50 - 60 Hz
Wattage 10 W
Ingress protection class
IP65
(IP code)
Luminous flux 700 lm
Colour rendering index (CRI) > 70
5500 - 6500 K
Colour temperature
(Daylight white)
Beam angle 120°
Ambient temperature -25 °C ~ 40 °C
Dimensions (LxWxH) 114.5x86x78 mm
Weight 450 g
Warranty 2 years
English
KNLEDFL20W
100 - 240 V AC
50 - 60 Hz
20 W
IP65
1400 lm
> 70
5500 - 6500 K
(Daylight white)
120°
-25 °C ~ 40 °C
180x140x100 mm
900 g
2 years