Battery Charge; Memory Card; Standby Mode - Brigmton BTM-5FLIP Manual De Instrucciones

BATTERY CHARGE

When the battery is low, the mobile phone will give a warning sound and
the low battery icon appears. If the battery is too low charging your phone
may not allow use various options until the load again. If it is too low can
the phone automatically turns off.
While the phone charging the battery the battery icon flashes on the
screen. When charging is complete the full icon will be displayed on the
screen. The charging time is 2 to 3 hours.
1. Insert the charger into the wall outlet.
2. Connect the charger to the phone.
3. The battery symbol flashes. (If the battery is completely exhausted, you
may have to wait for a few minutes)
4. When charging is completed, remove the charger from the outlet, then
remove the phone charger.
ON OFF
On: In stop-off state, press and hold the ON / OFF button.
Off: With the phone on, press and hold the ON / OFF button to turn it off.

MEMORY CARD

The phone supports MicroSD cards. To insert the card:
1. Turn off the phone, remove the battery and / or other external power
supply.
2. Insert the card following the instructions. Lift the metal card holder
carefully and insert the MicroSD card.
3. If you need to remove the card, turn off the phone and repeat the
process.
MICRO USB CONNECTION wire
The phone is compatible with USB interface, you can connect your phone
to your computer via the USB data line to copy, move files between your
mobile phone, etc.
1. Connect the micro USB cable to the phone input.
2. Connect the other end of the USB cable to the computer USB port.
3. Select the desired mode.
BASICS – CALLS

STANDBY MODE