HQ-Power HQMC10002 Manual Del Usuario página 5




4. Installation and Operation
Refer to the illustrations on page 2 of this manual.
1.
2.
3.
4.
5.
6.
5. Troubleshooting
The microphone does not record.
Buzzing sound on the recording.
V. 01 – 11/09/2018
HQMC10002
Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will
not accept responsibility for any ensuing defects or
problems.
Nor Velleman nv nor its dealers can be held responsible for
any damage (extraordinary, incidental or indirect) – of any
nature (financial, physical...) arising from the possession,
use or failure of this product.
Keep this manual for future reference.
Connect the microphone to a powered USB port.
Right-click on the speaker icon. Next, click on Recording
devices.
Open the Recording tab. Click on the USB Sound Device.
Click on Set Default  Properties  Levels, and set the
volume level at its highest.
Set the Boost at its lowest. Depending on the operating
system, you might need to open the Custom tab and
uncheck the AGC option.
Click OK to confirm.
Check if the microphone is well-connected.
o
Check the settings on your PC or portable device.
o
The boost function is enabled. Set the boost at its
o
lowest.
Uncheck the AGC option.
o
5 ©Velleman nv