Troubleshooting; Recommended Spare Parts - Blastrac BDC-1216 Manual De Instrucciones

- Troubleshooting

Problem
The vacuum cleaner does not start
The vacuum cleaner speed increases
Dust leaks from the vacuum cleaner
The suction motor is noisy

- Recommended spare parts

See fi g. 16.
Cause
No current
Clogged main fi lter
Clogged vacuum hose
Torn fi lter
Inadequate fi lter
Worn or broken motor carbon brushes
Worn or failing motor bearings
– 7 –
Remedy
Check if there is current in the socket
Check if the plug and the cable are
damaged
Contact an authorized Service Center
Shake the fi lter. Replace it if this is not
suffi cient
Check the vacuum hose and clean it
Replace it with another of identical
category
Replace it with another of a suitable
category and check
Remove and replace the motor carbon
brushes
Remove and replace the vacuum motor
US