D-Link DFE-530TX Guía De Instalación Rápida página 3

F. Secure the DFE-530TX with the screw from the back plate.
G. Replace your computer's cover.
Finishing the Installation
A. Reconnect the power cord and power on the computer.
B. Windows should automatically detect and install the adapter.
C. If prompted to restart (for Microsoft Windows 98/ME only), click "Yes".
Troubleshooting
1. If I've lost my CD, what can I do?
The CD contains software drivers and manual which can be obtained from D-Link (see
Technical Support below). Windows 2000 or XP in most cases will automatically install the
correct drivers.
Technical Support
Thank you for choosing D-Link products. For further information, support and product manuals
please visit the D-Link website at www.dlink.eu.
2. What do I do if the installed card does not seem
to function properly?
• Check that the card appears under
START>CONTROL PANEL>SYSTEM
>HARDWARE>DEVICE MANAGER
>NETWORK ADAPTERS.
• If it does not appear, make sure you have inserted
the PCI card correctly or try inserting the card into
an alternative PCI slot.
• If it appears with an error "!" or "?", remove or
uninstall the device by right clicking on the device.
Restart the computer, upon restart Windows will
redetect it. If error persists, try removing the card
and uninstalling the driver. Repeat the installation
process.
www.dlink.co.uk
: 08456 12 0003
3