Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS
ASSEMBLY INSTRUCTIONS
Step 1. Attach top ring and middle ring to the body plates
Please note that out of 16 body plates, four of them have
five drill holes which should be placed at 4,8,12 and 16 (in
order of assembly) for the legs to be attached later.
-Attach the middle ring (5) to all 16 body plates (3 & 4)
using screws (A) and nuts (B).
-Attach the top ring (2) to the outside edges of the body
plates (3 & 4) using screws (A) and nuts (B).
7
WHILE EVERY EFFORT HAS BEEN MADE BY THE MANUFACTURER TO
REMOVE ANY SHARP EDGES, YOU SHOULD HANDLE ALL COMPONENTS
WITH CARE TO AVOID INJURY.
TO ENSURE AN EASIER ASSEMBLY, WE STRONGLY ADVISE THAT ALL FITTINGS ARE ONLY
FINGER TIGHTENED DURING INITIAL ASSEMBLY. ONLY UPON COMPLETION OF
ASSEMBLY SHOULD ALL FIXING BE FULLY TIGHTENED.
Assembly will be easier with two people, however it is not necessary.
Step 2. Attach base to the main body
-Attach the base (7) to the outside bottom of the body
plates using screws (A) and nuts (B).
A
1. Lid
2. Top ring
3. Body plates (3 holes) x 12
4. Body plates (5 holes) x 4
5. Middle ring
6. Legs
7. Base
8. Bottom ring
9. Ash tray
A. M6 Screw
B. M6 Nut
x 1
x 1
x 1
x 4
x 1
x 1
x 1
x60
x60
Publicidad
