Publicidad
6. Do not turn the alter on maximum!
After connecting the filter, you will notice that if you turn
it on maximum, the water will rush out of it under high pressure.
Let us explain why this happens: Geyser EURO is a flow-
through type of a filter: the quality of water purification depends
on the flow rate – the slower the water passes through it, the
better it filters water!
Therefore, the filter is designed specially in such a way that
the person should use the filter with less pressure as possible:
then the water will pass through the Aragon material slower,
increasing the contact time with filter material. Accordingly,
cleaning from impurities will be much better and you will get truly
purified water, enriched with useful Aragonite!
7. "I have measured the water with a TDS meter and do not
see any difference before and after the measurement!"
Some of our customers try to check water hardness before
and after installing our filter, using a TDS meter or an EC meter,
but this is completely wrong! Measuring water hardness after
the installment of flow filters and ion exchange materials with
a TDS meter or an EC meter is incorrect, because a TDS meter
measures the electrical conductivity of water, but not its hardness!
The electrical conductivity of water depends on all impurities
8
Publicidad
