Assembly Instructions - Gardenline 1958 Manual Del Usuario

10 Foot Offset Umbrella
C
G
1. Place the Top Leg Base (D) over the Bottom Leg Base (E) to form an
"x". Attach the Umbrella Base Pole (C) to the Base Legs and screw
tightly with the 4 provided bolts (G).
Figure 2
Figure 1
Crank
2. In order to put the umbrella together, close the umbrella
properly by cranking the umbrella clockwise as shown in Figure 1.
As the umbrella is being cranked, make sure the rope stays
inside the poles and does not get tangled as shown in figure 2, and
then snap the curved pole together. Screw the Lower Pole (B) to
the Umbrella Frame (A) as shown in figure 3.
6
support@tdcusainc.com
MODEL: 1958 PRODUCT CODE: 1958 04/2016

Assembly Instructions

E
D
A
Figure 3
A
B
B
AFTER SALES SUPPORT
USA
10 Foot Offset Umbrella
3. Place a water or sand based counter-weight (not included) onto the
base to stabilize the umbrella. Other weights such as cinderblocks
or sandbags would work as well. Insert the Lower Pole (B) into the
Umbrella Base Pole (C). Tighten with the Locking Knob (F).
AFTER SALES SUPPORT
1800 599 8898 1800 599 8898
MODEL: 1958 PRODUCT CODE: 1958 04/2016
Assembly Instructions
B
B
F
support@tdcusainc.com
USA
7