LG VM122H9 NJM1 Manual Del Propietário página 23

Using the Energy Display
Function (Optional)
This function displays the amount of electricity
generated on the indoor display as the product
operates.
Display the Current Energy Usage
1
Turn the appliance on.
2
Press button and hold it about 3
kW [3 s]
seconds.
• The instantaneous power consumption (
or ) is displayed for a while on
some indoor units.
Display the Cumulative Energy
Usage (Optional)
1
Turn the appliance on.
2
Press button and hold it about 3
kW [3 s]
seconds twice.
• The cumulative power consumption (
is displayed for a while on some indoor
units.
NOTE
• The unit of the displayed value is kW.
• It is not displayed on the wireless remote
control.
• kW refers to instantaneous power
consumption.
• kWh refers to cumulative power consumption.
• If it is more than 99 kWh, which is the range
of expression, maintain it as 99 kWh.
• Power off resets its value.
• Display wattage under 10 kW(h) with 0.1
kW(h) unit, and display one over 10 kW(h)
with 1 kW(h) unit.
• The actual power may differ from the power
displayed.
Using the Light Off Function
(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit
display screen.
• Press LIGHT OFF button.
NOTE
• Turn on/off the Display screen.
• If the brightness of an indoor appliance's
display is set to OFF, pressing a button on the
remote control automatically turns the display
on for 5 seconds.
• This function may operate differently,
depending on the model.
Using the Comfort Air
Function (Optional)
Comfort Vane Operation
This function conveniently sets the vane to a
preset position to deflect the supply air away
from blowing directly onto the occupants in the
room.
1
Turn the appliance on.
)
2
Press COMFORT AIR button repeatedly
and select the desired direction.
• or
screen.
NOTE
or is displayed on some indoor units.
•
• This function is disabled when you press
MODE or JET MODE button.
• This function is disabled and auto swing of
vertical direction is set up when you press
button.
SWING
• When this function is off, the horizontal vane
operates automatically depending on the set
mode.
is displayed on the display
EN
23