BRUEL & KJAER 2250 Manual De Usuario página 262

246 Analizador portátil Tipos 2250 y 2270 – Manual de usuario
Compliance with Environmental Standards
The CE marking is the manufacturer's declaration that the product meets the requirements of the
applicable EU directives
RCM mark indicates compliance with applicable ACMA technical standards – that is, for
telecommunications, radio communications, EMC and EME
China RoHS mark indicates compliance with administrative measures on the control of pollution caused by
electronic information products according to the Ministry of Information Industries of the People's
Republic of China
WEEE mark indicates compliance with the EU WEEE Directive
Safety EN/IEC 61010– 1, ANSI/UL 61010–1 and CSA C22.2 No.1010.1: Safety requirements for electrical
equipment for measurement, control and laboratory use
EMC Emission EN/IEC 61000–6–3: Generic emission standard for residential, commercial and light industrial
environments
EN/IEC 61326: Electrical equipment for measurement, control and laboratory use – EMC requirements
CISPR 22: Radio disturbance characteristics of information technology equipment. Class B Limits
IEC 61672–1, IEC 61260, IEC 60651 and IEC 60804: Instrumentation standards
Note: The above is only guaranteed using accessories listed in this document
EMC Immunity EN/IEC 61000–6–2: Generic standard – Immunity for industrial environments
EN/IEC 61326: Electrical equipment for measurement, control and laboratory use – EMC requirements
IEC 61672–1, IEC 61260, IEC 60651 and IEC 60804: Instrumentation standards
Note: The above is only guaranteed using accessories listed in this document
Temperature IEC 60068–2–1 & IEC 60068–2–2: Environmental Testing.
Cold and Dry Heat.
Operating Temperature: –10 to +50 °C (14 to 122 °F)
Storage Temperature: –25 to +70 °C (–13 to 158 °F)
IEC 60068–2–78: Damp Heat: 93% RH (non‐condensing at +40 °C (104 °F)). Recovery time 2  4 hours
Humidity
Mechanical Non‐operating:
IEC 60068–2–6: Vibration: 0.3 mm, 20 m/s
IEC 60068–2–27: Bump: 1000 bumps at 400 m/s
IEC 60068–2–27: Shock: 1000 m/s
Enclosure IEC 60529 (1989): Protection provided by enclosures: IP 44
* With preamplifier, extension cable or protection plug connected to the top socket and the hinged cover protecting the bottom
connectors.
ADDITIONAL STANDARDS FOR MICRO USB WIRELESS
*
ADAPTOR UL‐1050
Safety EN 60950–1:2006+A11:2009+A1:2010
+A12:2011
EMC Emission EN 301 489–1 V1.9.2
EN 301 489–17 V2.2.1
EN 55022: 2010+AC:2011
Spectrum & EN 300 328 V1.7.1
Health EN 62311:2008
Restriction of EN 50581:2012
Hazardous
Substances
* From the D-Link Corporation declaration of conformance for Wireless N 150 Micro USB Adaptor DWA-121.
2
, 10 – 500 Hz
2
2
, 6 directions
*
FCC GRANT OF EQUIPMENT AUTHORIZATION FOR
MICRO USB WIRELESS ADAPTOR UL‐1050*
FCC Identifier KA2WA121A1
FCC Rule Parts 15c
Frequency 2412.0 – 2462.0
Range (MHz)
Output Watts 0.269
EC Declaration 1Tx1R 802.11bgn USB adapter
of Conformity
C‐Tick AS/NZS 4268: 2008+A1:2010
Authorization