WIKA WUC-10 Manual De Instrucciones página 15

7. Starting, operation
Specifications
Temperature coefficients within
rated temperature range
(active compensated)
Mean TC of zero
„
Mean TC of range
„
RoHS-conformity
CE- conformitiy
Pressure equipment directive
EMC directive
„
„ Directive ATEX of equipment
intended for use in potentially
explosive atmospheres
Ex-protection
Ignition protection type
Ex-protection
Ignition protection type
Assembly and packing area
Packaging
Shock resistance
Vibration resistance
Wiring protection
Short-circuit proofness
„
Reverse polarity protection
„
Weight
When designing your plant, take into account that the stated values (e.g.burst pressure,
over pressure safety) apply depending on the material, thread and sealing element used.
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio WUC-1X
Models WUC-10, WUC-15 and WUC-16
≤ 0.1 / 10 K
% of span
% of span ≤ 0.15 / 10 K
Yes
97/23/EC
2004/108/EC, EN 61326 Emission (Group 1, Class B) and Immunity
(industrial locations)
94/9/EC (for transducer with Ex-marking)
ATEX Category
II 3G Ex nA nL IIC T4/T5/T6 X (for transducer with Ex-marking)
Read the operating conditions and safety-relevant data in the operating
3)
instructions.
FM Class I (for transducer with FM-marking)
Non incendive Class I Division 2 Group A, B, C and D
Clean room class 5 according to ISO 14644
Double bagging according to SEMI E49.6
g 500 (1.5 ms)
0.35 mm (10 - 58 Hz) / 5 g (58.1 - 2000 Hz)
mm
according to IEC 60068-2-6
S+ towards U- (short-time)
U+ towards U-
kg Approx. 0.1
(not with bayonet connector)
3G (for transducer with Ex-marking)
3)
according to IEC 60068-2-27
GB
15