English
continuously for more than 5 minutes. Switch off the appliance afterwards and
allow the motor to cool down.
Multistage switch
The unit is equipped with a multistage switch. The following settings are
available:
0
- The unit is switched off
1
- Very low speed, good starting speed for mixing "soft" ingredients such as
flour, butter, etc
2
- Low speed, best speed for blending liquid ingredients.
3
- Medium speed, optimum speed for mixing cake and bread dough.
4
- Medium high speed, for whipping butter to form fine foam, sugar, for
desserts etc.
5
- High speed, for beating meringue, cake jelly, whipped cream etc.
Turbo
- This button allows you to have the full power of your appliance
immediately at your disposal.
How to use
IMPORTANT: MAKE SURE THAT THE ATTACHMENTS ARE FITTED CORRECTLY
- Place the base support on a flat, steady surface.
- Press the arm tilt button and at the same time, lift the arm on the support
upwards.
- Place the bowl in the special space, inserting it perfectly over the pin in the
base of the support.
- Fit the motor body complete with attachments onto the arm, inserting it from
the front of the support and so that the beaters or kneading hooks fit into the
driving slots. Slide it downwards, pressing gently until the plastic gear
mechanism on the attachment clicks into place inside the slot on the arm.
- Pour the ingredients into the bowl and pressing the arm tilt button lower the
arm of the support using the handgrip on the power body.
- Plug the power cord into a mains power source.
- Switch on the appliance by switching the multistage switch, the beater or
kneading hooks will start to rotate.
IMPORTANT: The appliance has been designed to operate for brief
periods (max. 5 minutes). Switch off the appliance after 5 minutes of use
and allow the motor to cool for at least 15 minutes before using again.
4
BEFORE USING THE APPLIANCE.
Instructions for use