NeuLog NUL-228 Guia Del Usuario página 19

Probe usage and care
The probe has two flat electrodes with known surface
areas and distance between them. A signal is supplied
to the electrodes and by testing the signal behavior, the
salinity of the solution is calculated.
General care:
 During measurements, make sure that the electrodes
(in the shape of a circle with a dot inside) are covered
with the liquid.
 Avoid touching the probe's flat surface, if possible.
 Never submerge the probe or sensor's plastic body in
any liquid.
 Gently rinse the electrodes with distilled water after
each use and between samples to avoid damage and
contamination.
 Handle and store with care to avoid damaging or
chipping the electrodes.
V2018.01
19
Home
English