Glacier bay HD58202-0701 1002 541 861 Guía De Uso Y Cuidado página 4

Installation
1
Preparing for installation
□
Remove the existing showerhead
(counterclockwise) with a wrench.
□
Clean the shower arm thread.
3
Installing the showerhead
Apply the thread sealant tape (E) to the threads on
□
the diverter (B).
□ Hand-tighten the showerhead (C) (clockwise) onto
the diverter (B).
B
5
Finishing the installation
□
Turn on the water supply, check for leaks, and
tighten as needed.
□
Place the handshower into the handshower holder.
E
C
4
2
Installing the diverter
□ Apply the new thread sealant tape (E) to the shower
arm.
□ Hand-tighten the diverter (B) (clockwise) onto the
shower arm.
B
4
Installing the handshower and
hose
□
Connect the hose (D) to the remaining outlet on the
diverter (B).
□
Attach the other end of the hose to the handshower
(A).
B
E
A
D