Trimming nose hair
1
Gently move the tip in and out of nose while turning it around to remove
unwanted hairs.
Trimming ear hair
1
Slowly move the tip round the ear to remove hairs that stick out beyond
the rim of the ear.
2 Gently move the tip in and out of the outer ear channel to remove
unwanted hairs.
Precision shaver
Use the precision shaver after trimming, to shave unwanted hairs on cheeks,
chin and along the beard with precision. Make sure to pre-trim your beard
first, with the full-size hair trimmer without comb, to obtain the best result.
Note: Use the precision shaver to remove remaining hairs and detailing your
beard style. It is not suitable for a full face shave.
1
Gently press the precision shaver onto the skin and shave along
contoured edges to remove any unwanted hairs.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as gasoline or acetone to clean the product.
Never dry the trimmer teeth with a towel or tissue, as this may damage the
trimmer teeth.
After every use: cleaning under the tap
1
Turn off the appliance and disconnect from the wall socket.
2 Remove any comb or cutting element from the appliance.
3 Rinse the hair chamber under a warm tap.
4 Clean the cutting element and comb under a warm tap.
5 Carefully shake off excess water and let all parts air dry completely.
Thorough cleaning
1
Turn off the appliance and disconnect from the wall socket.
2 Wipe the handle of the appliance with a dry cloth.
3 Remove any comb or cutting element from the appliance.
4 Remove any hairs that have accumulated in the hair chamber with the
cleaning brush supplied.
5 Remove any hairs that have accumulated in the cutting elements and/or
combs with the cleaning brush supplied.
6 Clean the cutting elements under a warm tap.
7 Clean the combs under a warm tap.
8 Carefully shake off excess water and let all parts air dry completely.
Cleaning the nose trimmer
Clean the nose trimmer immediately after use and when a lot of hair or dirt
has accumulated on the nose trimmer head.
1
Rinse the nose trimmer head with hot water.
2 Turn on the appliance and rinse the nose trimmer head once more to
remove any remaining hairs. Then turn off the appliance again.
For a thorough clean, immerse the nose trimmer head in a bowl with warm
water for a few minutes and then turn on the appliance to remove stubborn
hair/debris.
3 Carefully shake off excess water and let all parts air dry completely.
Cleaning the precision shaver
1
Hold the precision shaver at the grooves on each side and pull the top
part off the bottom part.
2 Blow and/or shake out any hair that has accumulated inside the
precision shaver.
Do not use the cleaning brush to remove hairs from the shaving foil.
3 Clean the top part of the precision shaver under a warm tap.
4 Carefully shake off excess water and let all parts air dry completely.
5 Reattach the top part onto the bottom part of the precision shaver.
Cleaning the body shaver
1
Remove the skin protector upwards off the shaver.
2 Clean the skin protector and body shaver under a warm tap.
Do not use the cleaning brush to remove hairs from the shaver or skin
protector.
3 Carefully shake off excess water and let both parts air dry completely.
4 Reattach the skin protector onto the body shaver.
Storage
- Store the appliance in the pouch supplied.
Note: Make sure the appliance is dry before you store it in the pouch.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go
to your Philips dealer. You can also contact the Philips Consumer Care
Center in your country (see the international warranty leaflet for contact
details).
Recycling
- This symbol means that this product shall not be disposed of with
normal household waste (2012/19/EU).
- This symbol means that this product contains a built-in rechargeable
battery which shall not be disposed of with normal household waste
(2006/66/EC). Please take your product to an official collection point or
a Philips service center to have a professional remove the rechargeable
battery.
- Follow your country's rules for the separate collection of electrical and
electronic products and rechargeable batteries. Correct disposal helps
prevent negative consequences for the environment and human health.
Removing the rechargeable battery
Only remove the rechargeable battery when you discard the product.
Before you remove the battery, make sure that the product is
disconnected from the wall socket and that the battery is completely
empty.
Take any necessary safety precautions when you handle tools to
open the product and when you dispose of the rechargeable battery.