Publicidad
Idiomas disponibles
Idiomas disponibles
REVERSING THE DOOR SWING (Cont.)
REMOVE REFRIGERATOR
2
DOOR
1. Remove all food from the inner door liner.
2. Tape the door shut with masking tape.
3. Remove the center hinge pin with a Phillips
screwdriver.
4. Remove the center hinge by removing two
Save the center hinge, hinge pin, screws and
center hinge gasket.
5. Remove the tape and tilt the door away from
the cabinet. Lift the door straight up to free
its bottom socket from the pin in the bottom
hinge bracket.
6. Set the door on a non-scratching surface with
the inside up.
7. Install the 2 hole plugs from the opposite side
of the cabinet to the screw holes vacated by
the center hinge removal.
49-1000592 Rev. 1
Installation Instructions
Center
Hinge Pin
Center Hinge
Gasket
TRANSFER BOTTOM HINGE
3
TO THE LEFT
Socket and
ratchet, remove
the 2 screws from
the bottom hinge.
2. Move the bottom
hinge pin from the
right to the left side
with a thin-blade
screwdriver until
the shoulder of
the hinge pin
is touching the
hinge.
3. Move the bottom
hinge from the
right to the left
side and tighten
the 2 screws.
4. Install the 2 hole
plugs from the
opposite side
of the cabinet
to the screw
holes vacated
by the bottom
hinge removal.
WARNING
leaving off parts, or overtightening screws, can lead to
the door falling off and result in injury and property
damage.
TRANSFER DOOR STOP TO
4
THE LEFT
remove the screws from the door stop on the
right with a Phillips screwdriver.
2. Install the door stop on the left of each door.
13
Publicidad
