Girmi MX02 Manual De Instrucciones página 11

PARTS MX02
2. Switch low speed
5. Blocking the shaft
OPERATING
- Assemble motor housing to the immersion stainless-steel shaft as in the "Assembling the shaft" section.
- Plug the unit to the electrical outlet.
- Insert the mixer in the bowl with the food to blend (ensure to immerse the entire blade to avoid any
splashing).
- Press the button (speed I or II) to start operating. For best results, follow the instructions in "Setting
processing speed" section.
CAUTION! Do not insert your fingers inside the bowl containing food
- Unplug the hand blender from the electrical outlet, once finished working,
This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milk shakes,
sauces, juices, cocktails, soups, vegetable soup, etc. ...
When processing fruits or vegetables, add also a small quantity of water to allow the device to operate in a
homogeneous way.
Insert the shaft (6) in the motor body (4) and rotate anticlockwise until it blocks. For unblocking, rotate
clockwise.
SETTING THE WORKING SPEED
The unit features two working speeds (2 and 3 button).
For best results and to avoid overheating, it is recommended to use the unit for short and regular intervals,
then for a long time, always making circular movements inside the container of food. It is also recommended
to start processing food from the first speed, ending up using the faster speed.
CLEANING
- Unplug the unit from the electrical outlet.
Do not immerse the motor body in water or other liquids, but wash it with a damp cloth and non-abrasive
detergent. Avoid any infiltration of water inside the motor housing.
Shaft, blades and accessories can be washed like normal dishes, with a non-abrasive sponge and mild
detergent. Dry them thoroughly before assembling them to the main body.
For a quick cleaning of the blades of the shaft during different processes, insert the hand blender into a cup
filled with water and operate for a few seconds.
TECHNICAL FEATURES
•
Power supply: AC 220-240V~50-60Hz. 200W
•
2 working speeds
•
Ergonomic motor housing
•
Detachable shaft
3. Switch high speed
6. Immersion shaft
Assembling the shaft
4. Motor body
7. Blades
10