Publicidad
Idiomas disponibles
Idiomas disponibles
5.2
Overhead Installation
When hung, the device must always be secured with a secondary attachment e.g. a
•
safety cable.
Never stand directly below the device when it is being mounted, removed or serviced.
•
Have a qualified technician check the device once a year and once before you bring it
into service.
Overhead mounting requires extensive experience: calculating workload limits,
•
determining the installation material to be used... Have the material and the device
itself checked regularly. Do not attempt to install the device yourself if you lack these
qualifications as improper installation may result in injuries.
For truss mounting, use an appropriate clamp (not incl.) and fit an M10 bolt through
•
the centre of the (folded) bracket.
5.3
Connection
Have a qualified electrician carry out the electric connection.
•
Connect the device to the mains with the power plug. All devices must be powered
•
directly off a grounded switched circuit. Do not connect to a dimmer pack.
The installation has to be approved by an expert before the device is taken into
•
service.
6.
Operation
6.1
Preparing Your Device
1.
Make sure the device is switched off.
2.
Open the tank compartment and remove the tank.
3.
Verify that the plastic hoses attached to the cap are in place and in good condition.
4.
Pour fluid into the tank, replace the tank into its compartment and close. Make sure the plastic hose
entering the smoke machine from the fluid tank is not bent or kinked.
5.
Connect the device to the mains, switch it on and let it warm up.
6.2
Using Your Device
1.
Prepare your device as described above.
2.
Press the manual activation button to output fog/smoke. Release the button to stop the fog/smoke
output.
6.3
Control Display
Description
Menu
scroll through the menu options
upwards through the menu list
downwards through the menu list
Enter
confirm a selection
Menu
V. 01 – 12/04/2017
display
function
Addr
DMX address setting
CoLo
LED colour setting
rEno
wireless remote on-off
orL
fluid level sensor on-off
HQSM10008
5
©Velleman nv
Publicidad
