Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Operating Instructions
Series F7000 Spring Driven Hose Reels
Low Pressure Fuel Reel Model Numbers:
F7600 OLP
F7800 OLP
F7900 OLP
F7925 OLP
Dimensions
SAFETY
Personal injury and/or equipment damage may result if proper safety
precautions are not observed.
• Ensure that reel is properly installed before connecting input and
output hoses.
• Bleed fluid/gas pressure from system before servicing reel.
• Before connecting reel to supply line, ensure that pressure does
not exceed maximum working pressure rating of reel.
• Remember, even low pressure is very dangerous and can cause
personal injury or death.
• Be aware of machinery and personnel in work area.
• If a leak occurs in the hose or reel, remove system pressure
immediately.
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com
A
20 1/4"
B
19 3/4"
C
7 13/16"
D
3 7/8"
Read this manual carefully before installing, operating or
E
7"
• A high tension spring assembly is contained within the reel.
Exercise extreme caution.
• Pull hose from reel by grasping the hose itself, not the control
valve.
• Ensure that reel, hose, and equipment being serviced are
properly grounded. Use an ohmmeter to check ground
continuity.
• If reel ceases to unwind or rewind, remove system pressure
immediately. Do not pull or jerk on hose!
• Treat and respect the hose reel as any other piece of machinery,
observing all common safety practices.
IMPORTANT
servicing this equipment.
Form# 829-696E Rev: 12/2014

Publicidad

loading

Resumen de contenidos para Reelcraft F7900 Serie

  • Página 1 • If a leak occurs in the hose or reel, remove system pressure immediately. observing all common safety practices. Form# 829-696E Rev: 12/2014 Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725 Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605 Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com...
  • Página 2 INSTALLING THE OUTPUT HOSE(S) person or directly to Reelcraft. Failure to installation height is 16 feet. Do not Warning: Use extreme caution; reel do so can result in personal injury and/or exceed this distance.
  • Página 3 None 3/4” x 25’ Reel Inlet Connection 1/2” FPT 1/2” FPT 3/4” FPT 3/4” FPT Max. Operating Pressure 500 PSI 500 PSI 500 PSI 50 PSI Max. Operating Temperature 210 °F 210 °F 210 °F 150 °F www.reelcraft.com Page 3...
  • Página 4 Page 4 Form# 829-696E Rev: 12/2014 Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725 Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605 Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com...
  • Página 5 Fixez le de servicio autorizado o directamente a apretado, devuelvalo 3 giros y enton- support guide la position désirée, et Reelcraft. El no hacerlo podría resultar ces asegurelo. en lesiones personales y/o daños del remplacez les écrous.
  • Página 6 Coneccion de Entrada al Carretel 1/2” FPT 1/2” FPT 3/4” FPT 3/4” FPT Max. Presion de Operacion 500 PSI 500 PSI 500 PSI 50 PSI Max. Temperatura de Operacion 210 °F 210 °F 210 °F 150 °F Page 6 www.reelcraft.com...
  • Página 7 Page 7 Form# 829-696E Rev: 12/2014 Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725 Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605 Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com...
  • Página 8 à esta dañado. Girelo con la mano 1. Tournez à la main la poulie (10) Reelcraft. Inobservation de le faire peut suave y revise su integridad. jusqu’au ressort est tendu, puis- 2. Configure el riel por arriba, abajo o résulter en blessure personnel et/ou...
  • Página 9 Aucun 3/4” x 25’ Raccord d’entré d’enrouleur 1/2” FPT 1/2” FPT 3/4” FPT 3/4” FPT Pression d’opération maximum 500 PSI 500 PSI 500 PSI 50 PSI Température d’opération maximum 210 °F 210 °F 210 °F 150 °F www.reelcraft.com Page 9...

Este manual también es adecuado para:

F7600 olpF7800 olpF7900 olpF7925 olp