Tabla de contenido
Publicidad
5½"
⅞"
Tools Required / Outiles Utiles /
Herramientas Útiles
3 mm
4 mm
2
6¾"
7⅜"
8"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Flow rate - boost setting
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This trim kit is for use with rough 10902181.
• Please inspect the faucet for shipping damage
before installation. Hansgrohe will not honor
claims for shipping damage after the faucet is
installed.
• For best results, the water pressure of the hot and
cold water supplies should be equal.
• The check valves should be inspected yearly, and
replaced if dirty or worn.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
0.9 GPM
1.3 GPM
Publicidad
Tabla de contenido
