Publicidad
Idiomas disponibles
Idiomas disponibles
2.4 Function Keys & Icon Description
2.4.1 Function Description
LCD Screen/LED Indicators/Keypad
1. LCD: Displays on the screen the operating status and setting.
2. LED: Displays the operation, alarm, operating pump, etc.
Four PUMP LED displays the operation of each pump.
LED Off: PUMP stopped
LED On: PUMP running
3. Function Keys
RESET
Used to clear faul codes
after the fault condition is
removed. (Some Faults may
require you to cycle power.)
2.4.2 Description of Icon
"Pump Setting" - "Pump 1 ~ 4"
Set to "USED" when the pump is
available for use.
"Pump Setting" - "Pump 1 ~ 4"
Set to "NOT USED" when the pump is
NOT available for use.
Menu Navigation and Data Entry
Pressing the menu button will enter the main setup menu items. The system will ask for a password if enabled. Using
the arrow buttons, navigate to the item desired, and press enter. Navigate with the arrows and enter the item of choice to
display its value. Enter to change the value using the arrow buttons and again press the enter button to accept the new
value, or press esc. to exit without saving. Press the esc., enter and arrow buttons as desired to move up, drill down,
and navigate the screen as needed.
WARNING:
Certain settings will not change when system is in "AUTO" mode. For these, set the HOA switches to "OFF" to make changes.
SJE ®
MENU
Used to access the main setup screen.
System may ask for a password
if enabled.
ESC
Press to move up in
the menu structure or
cancel an entry without
saving.
ENTER
Press to accept a value
or navigate down within a
menu item.
"Pump Setting" - "Pump 1"
J
When you set "Jockey Pump"
The VFD faulted while operating
the pump.
8
Navigation Buttons
VFDC-4100 Controller User Manual
Publicidad
