Publicidad
Idiomas disponibles
Idiomas disponibles
MODLED-010
RGB
LED strip IR controller
Instruction manual
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
I M P O R T A N T
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
C A U T I O N S
• Do not use or store the equipment near wet places. May cause malfunction or shock
hazard.
• Avoid dropping the unit as this may cause damage.
• Do not put heavy objects on the device or accessories.
• Do not use solvents or other chemicals to clean the exterior of the device.
• Remove batteries if they are empty or if the player is not going to be used for a long
time.
H I G H L I G H T S
The smart RGB LED controller is an additional accessory to turn on/off,
•
configure and control the color, intensity, brightness and sequence of your LED strips.
The IR remote control has an a effective operational range of 20ft.
•
The maximum power is 70 W supports therefore can be used with more than one
•
strip of LEDs connected in series, provided that the sum of all power does not exceed
the maximum capacity.
C O N N E C T I O N
1.
If
the
strip
has
a
compatible with the controller, simply align the
black wire with the arrow on the connector of
the controller.
If the strip does not have connector, consult a
specialist.
2. Connect a 12-24 V
6 A max
power supply
polarity + to the center
,
(not included) to the controller and
to a wall outlet.
Make sure that the power supply corresponds to the LED strip voltage.
3. Begin to operate the controller with remote control.
connector
V0.1
R
G
B
W
QUIC K
SLOW
DIY1
DIY2
DIY3
AUTO
DIY4
DIY5
DIY6
FLAS H
JUMP 3
JUMP 7
FADE3
FADE7
0813b
1. Turn on the strip.
2. Pause the sequence.
3. Raise / lower the brightness.
4. Press the button of the color you want.
5. DIY 1-6: custom colors. To save a custom color, select it and press a DIY
memory.
-Use
and
-When you get the desired color press selected DIY memory 5 seconds.
6 QUICK / SLOW: Increases / decreases the change rate in a sequence.
7. AUTO: Changes the sequence randomly.
8. Flash: Strobe function
9 JUMP 3 / 7: Switches between 3 or 7 colors.
10 FADE 3 / 7: Switches between 3 or 7 colors but with fade.
In the DIY buttons, you can save only customized
colors.
Input: 12-24 V
Charging current: 2 A x 3 CH
Power output: 70 W
Remote control
Input: 3 V
You must use a regulated power source
Product design and specifications are subject to change without notice.
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
C O N T R O L S
3
2
G
B
R
4
5
DIY1
DIY2
DIY3
DIY4
DIY5
DIY6
9
JUMP 3
JUMP7
FADE3
to increase and decrease the red, green and blue intensity.
S P E C I F I C A T I O N S
6 A max
(CR2025)
Product: RGB LED strip IR controller
Part number: MODLED-010
Brand: Steren
WARRANTY
CONDITIONS
THIS WARRANTY IS VOID IN THE NEXT CASES:
RETAILER INFORMATION
01 800 500 9000
1
W
QUIC K
6
SLOW
7
AUTO
8
FLAS H
10
FADE7
Publicidad
