Publicidad
Idiomas disponibles
Idiomas disponibles
Programming Your Remote
INPUT
Your remote is designed to control multiple audio/
TV
video devices. To use, you will need to program the
remote for your devices. There are two different
STR
methods you can use to program the remote,
Direct Code Entry or Auto Code Search.
DVD
•
The Direct Code Entry method is the
recommended method as it is the simplest
AUD
and quickest method in most cases.
The Auto Code Search method searches
•
through all the codes in the remote to find a
EXIT
code for your device.
Note: This remote comes preprogrammed for
Roku
boxes and Samsung TVs. Press TV for
®
Samsung TVs and STR for Roku boxes.
Direct Code Entry (Recommended)
A
1. Locate the Code List included with
INPUT
1
CH
TV
4
STR
7
DVD
SLEEP
2. Press and hold down the SETUP
(-)
AUD
SETUP
EXIT
INPUT
3. Press and release the device button
TV
A
STR
1
CH
DVD
4
AUD
7
SLEEP
EXIT
(-)
SETUP
MENU
OK
B
C
D
MENU
your remote. Find the section for the
type of device you wish to control,
2
3
(for example TV, STR, DVD, AUD).
Locate the brand of your device and
5
6
circle all the remote codes for the
OK
brand.
8
9
button on the remote until the red
0
ENTER
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
Note: The red light will either be a
small light at the top of the remote
or the power ON/OFF button.
MENU
on the remote for the type of device
you wish to control, (for example TV,
B
C
D
STR, DVD, AUD). The red light will
blink once and remain on.
OK
Note: Any of the device buttons on
2
3
the remote can be programmed
to control any of your devices. For
5
6
example, you can use the DVD
device button on the remote to
8
9
control a satellite receiver, digital
converter box, streaming media
0
player or any device category in the
ENTER
Code List.
6
Publicidad
