become wet with oil or water.
- The vents should always be kept clean and free of obstacles.
- Clean the machine thoroughly after each use. Blast the motor regu-
larly with compressed air.
- Check that the mains lead is in good condition. If it is not, take it to
an Official Service Centre to have it replaced.
CLEANING
- Disconnect the appliance from the mains and allow it to cool before
undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few drops of wash-
ing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as
bleach, or abrasive products, for cleaning the appliance.
- Never submerge the appliance in water or any other liquid or place
it under running water.
SUPPLIES
- Supplies can be acquired from distributors and authorised establish-
ments (such as filters, etc. ) for your appliance model.
- These supplies are available in specialist shops.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical support service if
product is damaged or other problems arise. Do not attempt to
disassemble or repair the appliance yourself as this may be danger-
ous.
- If the connection to the mains has been damaged, it must be
replaced, take the appliance to an authorised technical support
service. Do not attempt to disassemble or repair the appliance by
yourself in order to avoid a hazard.