Publicidad
Idiomas disponibles
Idiomas disponibles
footwear on. Allow your hands to hang naturally at your sides.
Measure from the crease in your wrist to the floor. If possible,
choose a walking aid that can adjust one adjustment above and
below this estimated optimal measurement. Consult with a
healthcare professional to ensure optimal rollator height.
C
D
E
RLS6BL/BG-KD FRONT AND REAR WHEEL
INSTALLATION
Users Can Refer to the Attached Assembly Guide Found on
the Handle
1. Remove all contents from packaging: backrest,
2 The legs attach: Via lining up the screw holes
3. Repeat Step 2- Three times for all rollator legs.
OPERATING INSTRUCTIONS
FOLDING UP YOUR ROLLATOR
1. If in use, ensure items in the pouch have been removed.
The rollator can easily fold from the user's side by pulling the
nylon strap under the seat up. The rollator will begin to fold
as the cord is pulled.
4. Use the height adjustment knobs to fasten
the handle bars in this position (Fig. C).
DO NOT
use excessive force when
installing any parts. Make sure knobs are
FULLY
tightened and are at equal heights.
ALWAYS
test for stability before applying
weight to hand grips.
5. Test and adjust the brake mechanism
tension to ensure proper and secure
BEFORE
locking
See "Brake Operation and Adjustment"
section for further guidance.
6. Insert backrest into frame receptacles until
snap buttons engage. An audible click will
be heard on each side.
back wheels assembly, rollator frame with seat
and bag, and front wheel assembly. Ensure all
hardware is located.
on the legs and frame. Line up the wheel
assembly to the frame of the rollator, use the
adjustment knob, screw in to lock into place.
Ensure wheels are adjusted to the same height.
use (Fig. D and E).
5
Publicidad
