Unpacking; Adjustments; Adjusting The Height Of The Shoulder Strap; Adjusting The Shoulder Strap Link - Kiddy adventurepack Instrucciones De Uso

Ocultar thumbs Ver también para adventurepack:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care should be taken to avoid injury to the child's feet when the
carrier is on or near the floor.
Please take care in extreme heat or cold that there are no metal parts
within the child's reach to avoid skin damage when the child touches
it.

2. Unpacking

Due to the risk of suffocation the packaging material must be kept out of the
reach of children.

3. Adjustments

3.1 Adjusting the height of the shoulder strap

Open the two flaps which attach the shoulder straps to the 'kiddy adventure
pack'. Feed the flaps in again at the appropriate height (Fig. 1. No. 1).
The height of the straps is adjusted properly when the lap belt sits above the
waist of the adult. If this is set correctly, your 'kiddy adventure pack' will sit
very comfortably, sparing your back.
Make sure that both flaps are firmly closed before using!

3.2 Adjusting the shoulder strap link

The child carrier can be adjusted to 2 heights (Fig. 2, A & B) for the linking of
the shoulder straps. To change the height of the belt, thread the strap out of
the adjusters and the same way back into the higher or deeper adjuster
again.
After the adjustment, both straps must be inserted at the same height
and tightened evenly.
5
ENG

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para Kiddy adventurepack

Tabla de contenido