Descargar Imprimir esta página

Honeywell HPA075 Serie Manual Del Propietário página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

FILTER REPLACEMENT
*For specific filter models, reference the Replacement Filters section of this manual (Page 4).
See the Getting Started section for filter replacement instructions (Page 5).
To help ensure stated product performance, use only Certified Honeywell Replacement Filters. You can purchase
Genuine Honeywell Filters at the retailer where you purchased your air purifier or order directly from
www.HoneywellPluggedIn.com.
These replacement intervals are intended as guidelines only. Performance of any filter media is dependent
upon the concentration of particles going through the system. High concentrations of particles such as dust,
pet dander, and smoke will reduce the useful performance of the filters.
NOTE: The Pre-Filter, Enhanced Odor & VOC Filter and HEPA Filters are NOT washable and should NOT be vacuumed.
DO NOT immerse them in water.
WARNING: Filters may be harmful if ingested. Avoid breathing dust when changing filters.
RESET FILTER CHECK INDICATOR
After you have replaced the appropriate filters, plug the unit back in. The Pre-Filter/Enhanced Odor and VOC Filter
and/or HEPA Filter Reset Light will remain on until it is reset.
Pre-Filter and Enhanced Odor & VOC Filter Reset:
• With the unit powered OFF, press the Filter Reset button
The Pre-Filter/Enhanced Odor & VOC Filter Indicator Light will blink twice to indicate the
timer has been reset and will then turn off.
HEPA Filter Reset:
• With the unit powered OFF, press and hold the Filter Reset button
Filter Indicator Light will blink twice to indicate the timer has been reset and will then turn off.
CLEANING AND STORAGE
We recommend that you clean the air purifier at least once every 3 months and before extended storage. Use only
a dry cloth to wipe the external surfaces of the air purifier.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION.
If your Air Purifier will not be used for more than 30 days, we recommend that you:
• Remove the HEPA Filters from the unit.
• Wrap the HEPA Filters in an air tight plastic bag.
• Remove the Pre-Filter and Enhanced Odor and VOC Filters and place them in an air tight plastic bag.
7
(continued)
(continued)
2 times within one second.
for two seconds. The HEPA

Publicidad

loading

Este manual también es adecuado para:

Hpa175 serie