Descargar Imprimir esta página

Whispbar K448W Instrucciones De Montaje página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
EN
Fitting Kit
K448W
Use hex screwdriver to reverse adjusting
screw 10 turns.
Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
Ensure each end of the crossbar is
adjusted equally.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Attaches to factory-fitted mounting points
Please check the rear of this manual for
information relating specifically to your
vehicle.
4

Publicidad

loading