Polygroup SUMMER WAVES RX330 Manual Del Propietário página 10

Before assembly, take a few minutes to identify and become familiar with all the parts.
WARNING:
CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTER CANISTER TO GAIN ACCESS TO THE POOL.
Suction & Return Fittings Installation
1. Set up your pool following the pool Owner's Manual instructions. Do NOT
fill water until the Filter Pump is properly installed. Locate the Outlet and
Inlet openings on the pool wall.
Inlet
Outlet
3. From inside the pool, install the Return Fitting
opening.
Inside Pool Wall
10
SETUP INSTRUCTIONS
into the Inlet
6
Outside Pool Wall
2. From inside the pool, install the Suction Fitting
opening.
Outside Pool Wall
4
Pump Installation
4. Take out the Filter Pump Assembly
Hose Clamps and four Universal Adaptor
q
11
into the Outlet
2
2
1
3
Inside Pool Wall
, two Hoses , four
w 9
.
l
9
10
28