Before first use
1
Thoroughly clean all parts that will come into food contact before you use
the appliance for the first time (see chapter 'Cleaning').
Note
• Make sure all parts are completely dry before you start using the appliance.
Preparing for use
1
Let hot ingredients cool down before you process them or put them in the
chopper bowl (maximum temperature 175°F / 80°C).
2
Cut large ingredients into pieces of approx. 2 x 2 x 2 cm (3/4 x 3/4 x 3/4 in)
before you process them.
3
Assemble the appliance properly before you put the plug in the wall outlet.
Note
• Always unwind the power cord completely before you switch on the
appliance.
• Remove all packing material or labels before using.
Using the appliance
Use this appliance for its intended household use as described in this manual.
Caution
• Avoid contact with moving parts. Keep hands and fingers away from blades
and out of container during operation or while appliance is plugged in to
prevent the possibility of severe injury to persons and/or damage to the
appliance.
MultiChopper (HR2505 only)
The MultiChopper is intended to chop onions, garlic, cheese, raw and cooked
vegetables, cooked eggs and fruits etc. into small and evenly sized pieces.
ENGLISH
9