Proline 2TOAST Manual De Instrucciones página 7

EN
BEFORE FIRST USE
Remove all packaging materials and wipe the outside of the appliance with
a damp cloth.
Before using the appliance for the first time, it is recommended to let the
appliance complete a few toasting cycles without slices of bread on the
highest browning setting in a properly ventilated room.
OPERATION
1. Plug the toaster into the mains socket.
2. Put the bread slice/slices into the slot(s) at the top of the appliance.
• Make sure the crumb tray is fully in place by pushing it firmly into the
appliance before using.
3. Turn the browning control knob to the desired setting.
• There are 6 settings: "1" for the lightest setting, "6" for the darkest
setting.
• You will need to experiment with this setting depending on your
browning colour preference and the thickness of the bread.
4. Press carriage lever down vertically until it locks in the down position
to switch the appliance on.
• The indicator light on the stop button will illuminate.
• Toasting process can be terminated at any time by pressing
carriage lever will spring up.
5. Once the bread has been toasted to the selected setting, the bread will
automatically pop up and the carriage lever will automatically spring
up to switch off the appliance.
• During toasting, you may observe the toasting colour, if the browning
setting is higher than required, press
time.
• The indicator light on the stop button will go out.
6. Remove the bread from the slot.
IMPORTANT: If the bread gets stuck inside the appliance, do not
attempt to dislodge the bread when the appliance is plugged in.
to stop the operation at any
EN-6
. The