NOCO BOOST XL GB50 Guia Del Usuario página 7

Troubleshooting
Error
Error LED: Solid Red
Boost Light Does Not Come On w/Cables
Connected Properly
Hot LED: Solid
Hot LED: Flashing
Hot LED: Flashes Then All LEDs Off
Cold LED: Solid
Cold LED: Flashing
Cold LED: Flashes Then All LEDs Off
Reason/Solution
Reverse polarity/Reverse the battery connections.
Connected battery is below 2-volts/ Remove all loads, and try again, or use Manual Override Mode.
Unit is fully operational, but approaching upper temperature limit. / Allow the unit to cool.
Unit is too hot to jump start, but other functions are still available. / Allow the unit to cool.
Unit is too hot to jump start or use other functions. / Allow the unit to cool, and bring the unit into cooler
environment.
Unit is fully operational, but approaching lower temperature limit. / Allow the unit to warm up.
Unit is too cold to jump start, but other functions are still available. / Allow the unit to warm up.
Unit is too cold to jump start or use other functions. / Allow the unit to warm up, and bring the unit into
warmer environment.
EN