Kohler K-99696 Guía De Instalación Y Cuidado página 2

IMPORTANT INSTRUCTIONS
WARNING: When using electrical products, basic
precautions should always be followed, including the
following:
WARNING: Risk of electric shock. A qualified electrician
should route all electrical wiring.
WARNING: Risk of electric shock. Disconnect power before
servicing.
CAUTION: Risk of product damage. The amplifier is rated to
operate in temperatures up to 104°F (40°C). Do not install near heat
sources (such as radiators or heat registers) or in any location where
the temperature may exceed 104°F (40°C).
NOTICE: This product is not water-resistant. Do not install in a
location where excessive moisture, high humidity levels, or
condensation are present.
NOTICE: Follow all electrical and building codes.
NOTICE: Provide unrestricted service access to the amplifier.
NOTICE: Provide a minimum of 6" (152 mm) of space around the
amplifier for proper air flow.
NOTE: This amplifier can be operated as a stand-alone unit, or can
be installed with the DTV+ showering system.
_________________________________________________________________
Operation with DTV+
To connect the amplifier to the DTV+ system, the K-99695 system
controller is required.
The provided data cable is used to connect the amplifier to the
system controller.
Refer to the "DTV+ System Layout" section in this guide.
Before Operating the System For the First Time:
Download and install the latest software for connected components.
This may take an hour or more to complete based on system
configuration and internet connection speed. Do not disconnect the
power from any components during software download and
installation.
1232038-2-A 2 Kohler Co.