Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
6. Keep pressure on the belt with your right hand (rib
Fig. 26
side down and flat side up) while rotating the auger.
The belt will be gradually pushed down onto the
pulley. When the belt is seated on the pulley, adjust
it so that the ribs of the belt match the grooves on
the pulley. (Fig. 24 - 27)
Fig. 27
Fig. 24
7. After belt is installed, replace the side plate and
secure it with the three screws. (Fig. 28)
Fig. 25
Screws
Fig. 28
13
Model SN71018
Publicidad
