Publicidad
Idiomas disponibles
Idiomas disponibles
MODEL: P2238US
!
WARNING:
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
UNPACKING
This tool has been shipped completely
●
assembled.
Carefully remove the tool and any
●
accessories from the box.
Inspect the tool carefully to make sure no
●
breakage or damage occurred during
shipping.
Do not discard the packing material until you
●
have carefully inspected and satisfactorily
operated the tool.
●
If any parts are damaged or missing, please
call 1-888-669-5672.
!
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
!
WARNING:
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
06
HTTP://WWW FREEMANTOOLS COM
.
FEATURES
SPECIFICATIONS
REQUIRES:
3.8 SCFM
with 100
fasteners per minute @ 90 psi
AIR INLET:
1/4 inch NPT
MAGAZINE CAPACITY:
140
fasteners
WEIGHT:
1.76 lbs
MAXIMUM PRESSURE:
100 psi
PRESSURE RANGE:
60 psi 100 psi
–
PIN SIZE RANGE: 1/4 inch to 5/8 inch
3/8"
(9.1mm)
1/4"
6mm
3/8"
10mm
0.0216"
0.0295"
13mm
(0.55mm)
1/2"
(0.75mm)
5/8"
16mm
Compatible with Bostitch 22 ga. 71 series
3/8"crown staples.
FEATURES
360 ADJUSTABLE EXHAUST
●
Allows user to direct air away from face.
ANODIZED ALUMINUM CYLINDER AND
●
MAGAZINE
For long lasting durability.
COMFORT-GRIP HANDLE
●
For increased comfort and control.
ERGONOMICALLY ENGINEERED BODY
●
Rugged and Comfortable debris free, extending
tool life.
●
AIR FILTER
Keeps interior components debris frees,
extending tool life.
1-888-669-5672
.
MODEL: P2238US
OPERATION
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool allows
users to direct the exhaust according to operator
preference. To adjust the direction, turn the exhaust
cap in the desired direction.
LOADING FASTENERS
⒈
Connect the tool to the air source.
⒉
Push down on the latch button(B). Pull back on
the inner magazine (C).
⒊
Please load the fasteners with the head of the
staples facing the same direction as the work
contact element beneath the magazine.
tool is a bottom loading stapler!
⒋
Push the inner magazine(C) forward until latch
button pops up.
Latch button(B)
Inner Magazine (C)
HTTP://WWW FREEMANTOOLS COM
.
!
WARNING:
The tool may fire when it is first
connected to the air source. Always
connect the tool to the air source before
loading fasteners to prevent injury from
unintended cycling. Always make sure
the tool's magazine is empty at the
beginning of each work session, before
connecting to an air source.
WARNING:
!
Use only those fasteners recommended
for use with this tool. Fasteners not
identified for use with this tool by the tool
manufacturer are able to result in a risk of
injury to persons or tool damage when
used in this tool.
WARNING:
!
Keep the tool pointed away from yourself
This
and others when loading fasteners.
Failure to do so could result in possible
serious personal injury.
!
WARNING:
Never load fasteners with the workpiece
contact or trigger activated. Doing so
could result in possible serious personal
injury.
UNLOADING FASTENERS
Unloading is the reverse of loading. Always
disconnect the air source before unloading.
!
WARNING:
Always unload all fasteners before removing
tool from service.
!
WARNING:
Always disconnect the air source before
unloading.
1-888-669-5672
.
07
Publicidad
