Sylvania LC320SS9 A Manual Del Propietário página 31

PC Settings
This function lets you adjust the PC screen position, clock and phase during
PC input.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "DETAIL", then press
[ENTER].
3
Use [Cursor K / L] to select "PC settings", then press
[ENTER].
4
Use [Cursor K / L] to select the setting you want to
adjust, then press [ENTER].
5
Detail Detail
Closed Caption
V–chip
PC Settings
Auto
HDMI1 Audio
PC Settings
PC Settings
Auto Adjustment
Horizontal Position 0
Vertical Position 0
Clock 0
Phase 0
6
Adjust the setting.
Auto Adjustment
Use [Cursor K / L] to select "Adjust", then press
[ENTER].
• The Horizontal/Vertical position, clock and phase of
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position
Use [Cursor s / B] to adjust.
Horizontal Position
H. Position 0 -
+
Adjust Move Enter
ENTER
Vertical Position
V. Position 0 -
+
Adjust Move Enter
ENTER
Clock, Phase
Use [Cursor { / B] to adjust the "Clock" setting to
stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Clock
Clock 0
Adjust Move Enter
ENTER
Phase
Phase 0
Adjust Move Enter
ENTER
Press [SETUP] to exit.
Note:
• Adjust the "Phase" setting after the "Clock" setting has
been properly adjusted.
• You may not obtain an appropriate screen with auto
adjustment for some signals. In this case, adjust the
settings manually.
Auto Adjustment
Auto Adjustment
This function automatically adjusts
Cancel
the position, clock and phase of
Adjust
the picture element.
Cursor Cursor
s B
to move PC to move PC
screen left screen right
to move PC to move PC
screen down screen up
Cursor Cursor
s B
to decrease to increase
setting value setting value
31
EN