Kingfisher 3663602842491 Manual página 7

C. Information for dismantling.
This appliance cannot be dismantled by the user, other than that as shown in the original assembly of
the user manual.
At the end of its useful life, the appliance should not be disposed of with household waste. Check
with your local governmental authority, domestic waste disposal services or the retailer where the
product was bought for recycling advice.
Trouble shooting
Problem
Excessive vibration.
The light is on, but the
fan does not work.
Both the light and
motor do not work.
Suction
performance reduced.
Works normally but
cooking smells linger.
This appliance respects laws of the suppression of radio interference. As the Manufacturer has
a policy of continuous product improvement, it reserves the right to adapt and carry out any
modifi cation considered necessary without prior warning.
Kingfi sher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom
Commercial Guarantee
We take special care to select high quality materials and use manufacturing techniques that allow
us to create ranges of products incorporating design and durability. That's why we offer a 24 months'
guarantee against manufacturing defects on our chimney hood.
This chimney hood is guaranteed for 24 months from the date of purchase, if bought in store, or
delivery, if bought online, for normal (non-professional or commercial) household use. You may only
make a claim under this guarantee upon presentation of your sales receipt or purchase invoice.
Please keep your proof of purchase in a safe place.
The guarantee covers all parts and labour costs associated with the repair of the chimney hood if it
Possible cause
The appliance is not installed
properly on the brackets.
The fan blade is damaged.
The fan motor is not fi xed tightly.
The fan blade is jammed.
The motor is damaged.
Light bulb blown.
Power connection loose.
Speed may be too low.
Aluminium fi lters
are dirty.
Top vent might be
obstructed.
Optional vent kit might be twisted.
The installation may not comply with
the manufacturers instructions.
Carbon fi lter is not fi tted in
recirculation mode or is full
of grease.
Solution
Take down the appliance and check
it is properly fi xed.
Switch off the appliance. Repair to
be carried out by qualifi ed service
personnel only.
Replace with a bulb of the
correct rating.
Check power supply.
Select a higher speed.
Clean the aluminium fi lters. (See
Care and maintenance section).
Clear any obstruction.
Ensure that the vent kit
is fi tted according to the
manufacturer's instructions.
The vent hose should be correct
diameter throughout with no
reductions or restriction.(See
installation section).
Fit carbon fi lter or replace the
carbon fi lter (See Care and
maintenance section).