Iget SMART W2022 Guía Rápida página 21

EN
Basic operation of the tablet:
1) button Lock on
- long pressing the button on the top of the tablet
2) button for Sleep
- short pressing the button to lock on
3) button for Waking up (LCD off)
- short pressing of button to lock on + unlock by pulling across display
4) button for Unlock
- long pressing of button to lock on + unlock by pulling across display
Camera:
Do not use manual focus while shooting a video, you may hear camera focusing in the video. The camera is
equipped with autofocus and there is no need to focus manually during shooting.
Installation of SD card:
The tablet must be turned off when inserting and removing the SDcard. If the tablet is off, you can insert an
expansion microSD card. You put it in the slot until you click it and then release it. Removing the SD Card -
Press the SD card and release it when it clicks to eject the card.
First use of tablet:
Before first use leave the tablet at least 15 minutes to charge, otherwise the tablet may not start.
Tablet charging:
The tablet has intelligent charging system. If the battery is fully discharged it is time to let the tablet charge for
a longer time. The system charges the battery with a small current to certain level to recovery and then tablet
start quick charging. The tablet can not be turned on in first phase. The tablet can be turned on at first when a
battery symbol indicates at least 2% of the charge. This process can take 40 minutes. This charging system
significantly prolongs the battery life. The tablet's battery should not be drained below 10% for the longest
battery life.
If you do not use the tablet for a long time:
If you will not be using the tablet for a long time, fully charge it before storing it and store it in a dry place at
room temperature when it is turned off to prevent damage to the tablet.
Tablet update:
Always check for updates when you first turn on and set up your tablet or if there's a problem. You need to
have a tablet connected to Wi-Fi to check for updates. The update is either displayed automatically or you can
check its availability in the settings: Settings - System - Wireless update - Check for updates. If an update
is available, install it immediately! Do not interrupt the update, shut down or restart the tablet during
installation. The tablet must have more than 30% battery to successfully complete the update.
Producer / exclusive importer of iGET products to EU:
INTELEK.CZ s.r.o., se sídlem Olivova 2096/4, Nové město, 110 00 Praha, CZ
WEB: http://www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Copyright © 2022 INTELEK.CZ s.r.o. All rights reserved.
21