Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the Fan
Blades
CAUTION: Remove 5 rubber packing mounts
and discard before installation.
Step 1. Attach the blades to the blade arms using
three screws and rubber washers as shown in
Figure 12. Start a screw into the arm, do not
tighten. Repeat for the 2 remaining screws and
washers.
Step 2. Tighten each screw securely starting with
the center screw. Make sure the blade is straight.
Step 3. Fasten the blade assembly to the motor
using the motor screws provided. (Figure 13)
7.
Screws
Rubber
washer
Blade arm
Figure 12
Motor
Blade assembly
Screws
Figure 13
Blade
Publicidad
