XPower FM-65B Manual De Usuario página 6

Pumping
Hose
If you want to fill the container with a solution / liquid other than water:
• IMPORTANT: Always disconnect the machine from the power source before
filling the solution.
• Do not exceed the maximum capacity of the container. For WT Series, it's
suggested to fill 80% of the maximum capacity.
• WARNING: Filling these types of solution / liquid into the solution tank may
cause safety hazards, corrosive damages to the machine or blockage of the
atomization assembly:
(1) Strong acids, strong bases or other corrosive liquids
(2) Alcohol, or flammable or explosive liquids
(3) Oil, or other organic oils
(4) Liquids containing particles or sediments
(5) Detergents
• IMPORTANT: If you intend to fill the solution of the types mentioned above,
please contact the manufacturer of the solution for usage reference and proper
methods of cleaning.
Switch Plate
MAX
OFF
MIN
English - 6
Variable Speed Switch
• Turn to "OFF" position to switch the machine OFF. Turn
clockwise to any position between "MAX" and "MIN" to
switch the machine ON.
• You can adjust to any desired speed variably. "MAX" is
the highest speed and "MIN" is the lowest speed.
Connect to WT Series
• Put the end of the pumping
hose through a small hole
into the WT Series.
• Put the into the slot of the
WT Series.