hillvert HT-IRI-08 Manual De Instrucciones página 26

automatic work schedule by 0-24-48-72 hours (depending on the number of
times you press the "+" button). During this time, the display will alternate
between the clock and the time remaining until the automatic operation is
scheduled to begin.
To deactivate the time delay to start automatic operation, first turn the timer
knob to OFF, and then turn it to RUN.
3.3.2 Manual control
The manual control mode is one-time, continuous watering without interfering
with the (saved) automatic work schedule.
To enter manual control, press the manual control activation/deactivation
button, and then the value increase or decrease button (+/-) to set the watering
duration from 0-240 minutes. Then, press the valve selection button (L/R). If
there is no further response from the user, the manual watering mode will start
in 5 seconds. During this time, the display will alternately show the clock and the
time remaining until the automatic operation is resumed.
Manual watering can be interrupted at any time by turning the function selector
knob to OFF or by pressing the manual override activation/deactivation button.
To resume automatic operation, turn the function selector to RUN.
3.4.
Cleaning and maintenance
a) Use only non-corrosive cleaners to clean the surface.
b) The device must be regularly inspected to check its technical efficiency and
spot any damage.
c) Use a soft cloth for cleaning.
d) Do not leave the battery in the device if it will not be used for a longer period
of time.
e) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a
metal spatula) because they may damage the surface material of the
appliance.