JVC GR-D371U Manual De Instrucciones página 24

VIDEO PLAYBACK
24
EN
Playback Using The Remote
Control
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
( pg. 25)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1
Pull out the battery
holder by pushing the lock
tab.
2
Insert the battery in the
holder, and be sure to
have the "+" mark visible.
3
Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor. The
transmitted beam's
approximate effective
distance for indoor use is
5 m (16 ft).
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
1Infrared beam transmitting window
●
Transmits the beam signal.
2
1
3
1
Lock tab
Remote sensor
The following buttons are available only when
the camcorder's Power Switch is set to "PLAY".
2PAUSE Button
●
Pauses the tape (
Up Button ( pg. 25)
3SLOW Rewind Button (
4REW Button
●
Rewind/Reverse Shuttle Search on a tape
( pg. 22)
●
Displays previous file in a memory card
( pg. 27)
Left Button ( pg. 25)
5INSERT Button (
6SHIFT Button (
7DISPLAY Button (
8SLOW Forward Button (
9PLAY Button
●
Starts Playback of a tape (
●
Starts Auto Playback of images in a memory
card ( pg. 27)
!FF Button
●
Forward/Forward Shuttle Search on a tape
( pg. 22)
●
Displays next file in a memory card (
Right Button ( pg. 25)
"A. DUB Button (
#STOP Button
●
Stops the tape (
●
Stops Auto Playback (
Down Button (
$EFFECT Button (
%EFFECT ON/OFF Button (
The following buttons are available when the
camcorder's Power Switch is set to "REC".
&Zoom (T/W) Buttons
Zoom in/out ( pg. 20, 25)
(Also available with the Power Switch set to
"PLAY")
(START/STOP Button
Functions the same as the Recording Start/
Stop Button on the camcorder.
)S.SHOT Button
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the Power Switch set to
"PLAY")
pg. 25)
pg. 25)
pg. 45)
pg. 25)
pg. 23, 42)
pg. 25)
pg. 21)
pg. 45)
pg. 21)
pg. 27)
pg. 25)
pg. 25)
pg. 25)
pg. 27)