Descargar Imprimir esta página

Bossini Cube Inox H81170 Instrucciones De Montaje página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
RECOMMENDATIONS FOR PROPER USE
Proper use of this product will allow you to avoid damages to the bathroom environment.
*
To prevent impurities or debris from getting inside the product and causing functional problems,
always flush out the system before connecting it to the supply pipes.
It is recommended to install the filter at the system's water intake.
*
To keep the diffuser clean and prevent lime scales from clogging the diffuser, we advise that you
periodically rub the silicone nozzles to free them of the lime deposits.
CLEANING
Dear Customer,
Congratulations for choosing a Bossini product and we thank you for the trust you have given us. To keep the
material's appearance as long as possible, a few guidelines must be followed.
Cleaning metal parts: water contains calcium that deposits on surfaces and forms unpleasant spots. For
routine cleaning, simply use a damp cloth with a little soap, rinse and dry. Calcium spots can therefore be
avoided by drying after use.
Important note: Using only a soap-based detergent is recommended. Never use abrasive detergents or
disinfectants or those containing alcohol, hydrochloric acid or phosphoric acid, Bleach, chlorine etc
Cleaning the rubber nozzles: the showerhead is equipped with the "Easy-Clean" system with silicon nozzles.
Calcium is a shower's worst enemy and that is why Bossini proposes theEasy-Clean" system. These silicon
nozzles are extremely heat resistant and with hot water they dilate, thus detaching the first layer of calcium.
Moreover, periodically rubbing the silicon nozzles manually easily gets rid of calcium. With one simple gesture,
your shower is always perfect.
Dear Customer, we would like to remind you that the warranty on our product's surface is not valid if the
material undergoes treatment different than that suggested. The warranty does not cover any damage due
to deposits of calcium or impurities.
WARRANTY TERMS
Dear Customer,
We congratulate you and thank you for choosing a Bossini quality product
The product is covered by 2 Years warranty against any defects due to manufacturing faults.
The warranty does not cover damages caused by improper installation or use, neglect, incorrect plumbing,
normal fair wear and tear, damages caused by limescale deposits or impurities, the use of detergents and
maintenance products other than those specifically recommended in our instructions manual. Furthermore
Bossini is not responsible for labour costs and/or damages, whether accidental or consequent to the
installation, repairing or replacement of the product.
The request for replacement under the terms of this warranty must be made in a letter setting out the date and
place of purchase and giving a brief explanation of the problem. The letter must be received by us within the
warranty period and must be accompanied by proof of the purchase date (e.g. a receipt). The warranty only
covers production faults / defects and is strictly limited to the repair or free replacement of the parts which
are recognised to be defective. The defective parts have to be returned to Bossini carriage free with a report
describing the defect. Bossini reserves the right to inspect the part alleged to be faulty or defective and to
evaluate the applicability of the warranty terms.
The warranty period commences on the date the product is purchased, evidenced by the relevant purchase
document (e.g. receipt, invoice, cash voucher) and it is NOT renewable.
For further information please contact Bossini or its distributor.
CUBE INOX
GB
7

Publicidad

loading