Makita DUH651Z Manual De Instrucciones página 7

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Battery indicator
6. Knob
7. Housing
8. Switch trigger B
9. Switch trigger A
10. Lock-off button
11. Adjusting dial
12. Cutting height
SPECIFICATIONS
Blade length
Strokes per minute (min
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Noise
Model L
PA
DUH551
DUH651
• Wear ear protection.
Vibration
Model
DUH551/DUH651
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Explanation of general view
13. 10 cm
14. Trimming direction
15. Hedge surface to be trimmed
16. Tilt the blades
17. Press
18. Chip receiver
19. Nut
20. Shear blade
21. Branch catcher
22. Hooks
23. Fit the hooks into groove
24. Grooves
Model
-1
)
Sound pressure level
Uncertainty K
(dB (A))
(dB (A))
81.5 2.1
82 1.4
Declared emission (m/s
2.5
DUH551
550 mm
1,065 mm
4.6 - 5.3 kg
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/
BL1840B/BL1850/BL1850B/BL1860B
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF
Sound power level
L (dB (A))
PA
91
91.1
2
) Uncertainty K (m/s
1.5
WARNING:
ENG901-1
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
25. Press the levers on both sides
26. Unlock the hooks
27. Blade cover
28. Screws
29. Under cover
30. Plate
31. Crank
32. Oval hole of shear blade
33. Limit mark
34. Holder cap cover
35. Slotted screwdriver
36. Brush holder cap
DUH651
650 mm
1,000 - 1,800
1,135 mm
D.C.36V
4.7 - 5.5 kg
Applicable standard or
Uncertainty K
(dB (A))
1.5
1.5
Applicable standard or
2
)
EN60745-2-15
directive
2000/14/EC
directive
7